MSI GeForce RTX 3060 Ventus 2X 12G OC Graphic Card
₨ 160,000
- 12GB GDDR6 · GeForce RTX 3060
- 235 × 124 × 42mm
- 1 × HDMI 2.1; 3 × DisplayPort 1.4 · up to 4 displays
- 550W recommended system PSU · 8-pin x 1
MSI VENTUS · GeForce RTX 3060
12GB GDDR6.
Dual-fan Ampere.
The MSI GeForce RTX 3060 Ventus 2X 12G OC Graphics Card combines 12GB GDDR6 with a two-fan cooling design. The exact manufacturer model is GeForce RTX 3060 VENTUS 2X 12G OC.
The cooling layout, memory configuration and connection requirements below apply to this exact edition. Match them to the space, power supply and displays in your PC build.
- 12GB
- GDDR6
- 192-bit
- Memory interface
- 235mm
- Card length
Graphics platform
12GB GDDR6.
GeForce RTX 3060.
NVIDIA Ampere is paired with 12GB GDDR6, 15 Gbps memory and a 192-bit interface. Capacity is useful when checking application and game requirements, but it does not independently establish frame rate or resolution performance.
Published clock modes
The published default boost is 1807MHz. These are mode-specific values; sustained clocks depend on the workload and thermal conditions.
DLSS and ray-traced games
Supported games can use NVIDIA DLSS Super Resolution and ray-tracing features. This Ampere card is not being described as an RTX 50 Series Multi Frame Generation model.
Choose the exact edition
GeForce RTX 3060 VENTUS 2X 12G OC identifies this board. The cooler, dimensions and power connection are board-specific details; do not substitute a reference-card specification.
Thermal and board design
A two-fan assembly.
VENTUS cooling and construction.
The exact MSI GeForce RTX 3060 VENTUS 2X 12G OC edition uses a two-fan cooler. The verified features below explain how its fan assembly, heatsink and board construction work together. Keep the surrounding airflow path clear in the finished PC.
Alternating TORX Fan 3.0 blades
The TORX Fan 3.0 arrangement combines traditional and dispersion blades to move air into the heatsink. It is the cooling design listed for this RTX 3060 VENTUS card.
Thermal pads for board components
Thermal pads help transfer heat from board components to the heatsink. This complements the GPU cooler and fan assembly.
Fans can pause at lower temperatures
MSI Zero Frozr can stop the fans when temperatures are relatively low and restart active cooling when needed. It is a temperature-dependent behavior, not a guarantee of silent gaming.
A model-specific PCB
MSI describes hardened circuits and optimized trace routing in the custom PCB. Choose components and cabling for this exact board rather than an assumed reference design.
Build compatibility
Space. Power.
The right display connections.
The GeForce RTX 3060 VENTUS 2X 12G OC board has its own dimensions and connection layout. Check these before ordering; an RTX or Radeon family name alone is not a compatibility check.
Measure usable clearance
Use the manufacturer’s 235 × 124 × 42mm dimensions. Confirm available length with front fans/radiators installed, card thickness around adjacent slots and power-cable space at the side panel.
Match PSU and cabling
MSI recommends a 550W system PSU. The card’s listed power consumption is 170W, a separate figure from PSU capacity. The card power connection is 8-pin x 1. Confirm the PSU and cable arrangement for your full configuration.
Up to 4 displays
1 × HDMI 2.1; 3 × DisplayPort 1.4. Monitor, cable, display mode and any DSC requirement determine available resolution and refresh rates. Maximum digital resolution is not a gaming-FPS promise.
Monitoring and customization.
MSI Afterburner provides graphics-card monitoring and supported tuning controls. Use the exact model’s official support page for applicable MSI software.
Exact-model specifications.
- Exact edition
- GeForce RTX 3060 VENTUS 2X 12G OC
- GPU
- GeForce RTX 3060
- Video memory
- 12GB GDDR6
- Memory speed / interface
- 15 Gbps / 192-bit
- CUDA cores
- 3584
- Default boost clock
- 1807MHz
- PCI Express interface
- PCI Express Gen 4
- Display outputs
- 1 × HDMI 2.1; 3 × DisplayPort 1.4
- Maximum simultaneous displays
- 4
- Dimensions
- 235 × 124 × 42mm
- Recommended system PSU
- 550W
- Card power connector
- 8-pin x 1
- Manufacturer-listed card power
- 170W
- Maximum digital resolution
- 7680 × 4320; display capability, not gaming FPS
- OpenGL support
- 4.6
- DirectX support
- 12 API
Questions about this edition.
Is this the 12GB RTX 3060 edition?
Yes. The VENTUS 2X 12G OC has 12GB GDDR6 and a 192-bit memory interface. Check that exact edition when comparing another RTX 3060 listing.
What clearance does this VENTUS card need?
The published dimensions are 235 × 124 × 42mm. Check usable space after front fans or radiators are installed, nearby expansion cards and cable routing. Card length alone is not a complete fit check.
What PSU connection should I prepare?
The official specification states 8-pin x 1. The recommended 550W figure is for the system PSU, not a claim that the GPU consumes that entire amount. Confirm PSU compatibility and the manufacturer’s cable-installation guidance.
How many displays does this edition support?
The exact specification lists a maximum of 4 displays. Its output mix is 1 × HDMI 2.1; 3 × DisplayPort 1.4. Resolution and refresh-rate choices depend on the monitor, cable and supported display mode.
Why might the fans stop during desktop use?
The manufacturer describes temperature-dependent fan-stop operation. Active cooling resumes when needed. This is expected behavior under suitable conditions, not a guarantee of silent operation during games.
Manufacturer resources: MSI model overview · Exact specifications · Official model datasheet.
Explore graphics cards at GameOn.pk.
Specifications and box contents may vary by region or manufacturer revision. Please check the linked manufacturer information and confirm any essential feature or included accessory with GameOn.pk before ordering.
| Brand | MSI |
|---|---|
| Color | Black |
| Warranty | Official Warranty |
Only logged in customers who have purchased this product may leave a review.
Reviews
Clear filtersThere are no reviews yet.